How can make high quality coil?
Modern coiling machine electric control system has a complex process and high precision of actuators, many high-tech electrical components have been used to the coiling machine and equipment performance continuously improved, so as to adapt to the modern coil winding, then such a high precision winding machine winding coil must be no problem, actually otherwise, there are many customers found after bought a coiling machine winding coil surface is not flat and the phenomenon such as pad line, this is because the need not only to make high quality of the coil winding high precision winding machine, also need to have proper program and a series of reasonable adjustment of the attachment.
First is the process of the winding machine set, after buying coiling machine users should be familiar with the functionality and performance characteristics of winding machine, familiar with equipment function set after the first start from a simple coil winding, step by step, to grasp equipment setting technique and application of the average user at buying coiling machine manufacturers will provide technical training and on site commissioning, insufficient attention this training opportunities for many users, manufacturers and technical personnel on-site training is more popular than users to understand the instructions to understand, the operator should start work and study to master winding machine set. The reasonable setting of winding machine procedure is an important part of the coil winding quality.
Followed by the setting of the tension of winding machine for tension setting does not have a unified standard, within the scope of the enameled wire security tension value users should according to their own product features to adjust, tension setting has a great influence to the character of the coil, tension is set too small winding coil will appear bloated row line no problem such as location, too much tension can cause a disconnection, multi-layer winding when layer problems of wire enameled wire will also not much, because the materials appear different tension requirements, usually aluminium wire tension needs to be smaller, though not easy to be pulled fine copper wire, but also not suitable for large Angle line, Angle will cause detonation paint and so on.
The last is the selection of winding frame, this is a problem that many users ignore, in order to reduce costs to choose inferior plastic or skeleton thinning side neck caused a serious deformation of the skeleton, coiling machine performs each step of the sequence is controlled according to the program instructions, serious can cause coil skeleton if there is a deformation range of winding, even change the electric property, so the user must not covet is cheap when choosing skeleton to affect the quality of coil.
